Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
11.1. Specifications
11.2. Forward suspension bracket
11.3. Back suspension bracket
11.4. Steering
11.4.1. General information
11.4.2. Check of a pressure of the steering pump
11.4.3. Check and adjustment of the hydraulic limiter
11.4.4. Adjustment of a steering shaft
11.4.5. Assessment of a condition of components of a steering drive
11.4.6. Removal and installation of a steering wheel
11.4.7. Removal and installation of a contact cable drum of a steering wheel
11.4.8. Removal and installation of the sensor of an angle of rotation of a steering wheel
11.4.9. Removal and installation of the mechanism of an electronic blokirator of a steering column
11.4.10. Removal and installation of a steering column with the adjustment electric drive
11.4.11. Removal and installation of the steering pump
11.4.12. Removal and installation of the line of cooling of GUR liquid
11.4.13. Removal and installation of the steering mechanism
11.4.14. Design of the steering mechanism
11.5. Suspension bracket geometry
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 









11-4-14-konstrukciya-rulevogo-mekhanizma.html

11.4.14. Design of the steering mechanism

Design of the steering mechanism

1 — the Case
2, 26 — Washers
3, 22, 35, 41 — Bolts
4, 51 — Lock rings
5 — the Cover
6, 8, 13, 14, 16-20, 23, 28, 32, 33, 37-40, 46, 48, 49 — Sealing rings
7 — the Nut
9 — the Working piston
10 — the Bearing with angular contact
11, 25 — Roller bearings
12 — the Carving cover
15 — Koronchataya a nut

21 — a bearing Cover
24, 43, 45, 50 — Needle bearings
27 — the Carving ring
29, 31, 47, 53 — Safety locks
34 — Perelivna the valve
36 — the Spring lock washer
42 — a casing Cover
44 — the Remote tube
52 — the Persistent washer
54 — the Adjusting screw
55 — the Steering shaft
56 — the Worm


«previous page
11.4.13. Removal and installation of the steering mechanism
following page»
11.5. Suspension bracket geometry